Accuracy requirements for bis(3-dimethylaminopropyl)aminoisopropyl alcohol ZR-50 in automotive parts manufacturing

Sat, 08 Mar 2025 11:09:05 +0000

Accuracy requirements for bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in automotive parts manufacturing

Catalog

Introduction
Overview of Bis(3-Diylpropyl)aminoisopropyl alcohol ZR-50
Accuracy requirements in automotive parts manufacturing
The application of ZR-50 in automotive parts manufacturing
Product parameters and performance
Key factors in precision control
Practical case analysis
Future development trends
Conclusion

1. Introduction

The automotive industry has extremely high requirements for materials, especially in terms of accuracy and performance. Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 plays an important role in the manufacturing of automotive parts. This article will discuss in detail the accuracy requirements of ZR-50 in automotive parts manufacturing, including its product parameters, application scenarios, key factors in accuracy control, and actual case analysis.

2. Overview of Bis(3-Diylpropyl)aminoisopropyl alcohol ZR-50

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 is an organic compound with excellent chemical stability and mechanical properties. Its molecular structure contains multiple amine and hydroxyl groups, making it outstanding in a variety of industrial applications.

2.1 Chemical structure

The chemical structure of ZR-50 is as follows:

 CH3
    |
CH3-N-CH2-CH2-CH2-CH2-N-CH2-CH2-CH2-CH2-OH
    |
   CH3

2.2 Physical Properties

Properties	value
Molecular Weight	230.35 g/mol
Density	0.95 g/cm3
Boiling point	250°C
Melting point	-20°C

3. Accuracy requirements in automotive parts manufacturing

Auto parts manufacturing requires extremely high accuracy, especially for key components such as engines, transmission systems and chassis. Accuracy not only affects the performance of the vehicle, but also directly affects safety and durability.

3.1 Accuracy Standard

Components	Accuracy Requirements
Engine piston	±0.01 mm
Transmission Gear	±0.005 mm
Chassis suspension	±0.02 mm

3.2 Factors influencing accuracy

Material Properties
Processing Technology
Equipment Accuracy
Environmental Conditions

4. Application of ZR-50 in automotive parts manufacturing

ZR-50 is widely used in automotive parts manufacturing, mainly reflected in the following aspects:

4.1 Engine parts

ZR-50 is used to manufacture components such as engine pistons, cylinder blocks and valves. Its high precision and high temperature resistance significantly improve the efficiency and life of the engine.

4.2 Transmission System

In components such as transmission and drive shaft, the high strength and wear resistance of the ZR-50 ensure the stability and reliability of the transmission system.

4.3 Chassis system

The ZR-50 is used to manufacture suspension and steering system components, and its excellent impact resistance improves vehicle handling and comfort.

5. Product parameters and performance

The product parameters and performance of ZR-50 are shown in the following table:

parameters	value
Tension Strength	120 MPa
Compressive Strength	150 MPa
Abrasion resistance	0.01 mm/1000 km
Temperature resistance range	-40°C to 250°C
Chemical Stability	Acoustic and alkali resistant, oil resistant

6. Key factors in precision control

In Automotive PartsIn the manufacturing of parts, accuracy control is the key. The following are the main factors that affect the accuracy of ZR-50:

6.1 Material Purity

The purity of ZR-50 directly affects its mechanical properties and processing accuracy. The high-purity ZR-50 ensures high precision and long life of components.

6.2 Processing technology

Advanced processing techniques such as CNC machining and precision casting can significantly improve the accuracy of ZR-50 components.

6.3 Equipment Accuracy

High-precision processing equipment is the basis for ensuring the accuracy of ZR-50 components. The stability and accuracy of the equipment directly affect the final quality of the product.

6.4 Environmental Control

The control of temperature and humidity has an important influence on the processing accuracy of ZR-50. A constant temperature and humidity environment can reduce material deformation and dimensional errors.

7. Actual case analysis

7.1 Case 1: Engine piston manufacturing

A certain automaker uses the ZR-50 to manufacture engine pistons. Through precision machining and strict environmental control, the piston accuracy reaches ±0.01 mm, significantly improving the engine performance and fuel efficiency.

7.2 Case 2: Transmission gear manufacturing

Another manufacturer uses the ZR-50 to manufacture gears. Through CNC machining and high-precision detection equipment, the gear accuracy reaches ±0.005 mm, ensuring the smooth operation and long life of the gearbox.

7.3 Case 3: Chassis suspension system manufacturing

A high-end automobile brand uses ZR-50 to manufacture chassis suspension system components. Through advanced processing technology and strict quality control, the accuracy of the suspension system reaches ±0.02 mm, improving the handling and comfort of the vehicle.

8. Future development trends

With the continuous development of the automobile industry, the requirements for material performance and accuracy will become higher and higher. As a high-performance material, ZR-50 will be more widely used in automotive parts manufacturing in the future.

8.1 New Materials Research and Development

In the future, improved and new materials of ZR-50 will continue to emerge to meet the requirements of higher accuracy and performance.

8.2 Intelligent Manufacturing

The application of intelligent manufacturing technology will further improve the processing accuracy and production efficiency of ZR-50 components.

8.3 Environmental Protection Requirements

With the increase in environmental protection requirements, the production and application of ZR-50 will pay more attention to environmental protection and sustainable development.

9. Conclusion

Bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 has extremely high accuracy requirements in automotive parts manufacturing. Its excellent performance and wide application make it the automotive manufacturing industryImportant materials. By strictly controlling material purity, processing technology, equipment accuracy and environmental conditions, the high precision and long life of ZR-50 components can be ensured. In the future, with the development of new materials and intelligent manufacturing technologies, the application of ZR-50 in automotive parts manufacturing will be more extensive and in-depth.

The above content introduces in detail the accuracy requirements of bis(3-diylpropyl)aminoisopropyl alcohol ZR-50 in automotive parts manufacturing, covering product parameters, application scenarios, key factors in accuracy control, and actual case analysis. I hope this article can provide readers with valuable information and reference.

]]>

精品国产高清自在线一区二区三区,精品亚洲综合在线第一区,777a∨成人精品桃花网